Simple Way to Configure M3i Zero

Many people reflected that M3i Zero can not work on dsi well.Configure M3i Zero as follows may be available:

1. Download M3i Zero newest kernel.
2. Unzip it, and drag that 1 file (F_CORE.DAT, its the upgrade file), and one folder (SYSTEM, its the software the M3 real needs to run on) onto your micro sd card. Make sure the file and folder at in the “ROOT” of the micro sd card!
3. Put micro sd card into the M3i Zero.
4. Put the upgrade cable into the M3i (the shinny side, i.e. the side with the ARROW on it should be facing the BACK of the M3i!)
5. Plug the USB port into your PC, or anything that has a port that will give it power.
6. The M3i should blink for about 15~20 seconds. After it stops blinking, your M3i is enabled.
7. Unplug the upgrade cable from your PC and M3, and then put your M3i zero into your DS/DSi, and it should be working.
8. You can now delete the file F_CORE.DAT from the micro sd card as it will no longer be needed (its only needed to flash your m3i once)

Refer: www.gamezway.com